High Performance Digital Mode Interfaces for Ham Radio
Full list of Transceivers which our Digimode-4 Interface supports
Icom Transceivers​
​Radios with the 8 Pin DIN accessory and 3.5mm CI-V/CAT port
IC-275, IC-375, IC-575, IC-707, IC-725, IC-726, IC-728, IC-729, IC-735, IC-736, IC-737, IC-738, IC-746 (All Versions), IC-756 (All Versions), IC-761, IC-765, IC-775, IC-775DSP, IC-781, IC-820, IC-821, IC-910, IC-7400, IC-7600, IC-7610, IC-7700, IC-7850.
Radios with the 13 Pin DIN accessory and 3.5mm CI-V/CAT port
IC-78, IC-703, IC-706 (All Versions), IC-718, IC-7000, IC-7100, IC-7200, IC-7300, IC-7410, IC-9100.
​
​
Kenwood Transceivers​​
Radios with the 13 Pin DIN accessory connector and 6 Pin DIN CAT port
TS-140, TS-450s, TS-680, TS-690s, TS-790s, TS-850s, TS-950s.
** TS-140s and TS-680s require the Kenwood original (now obsolete) IF-10C chipset to be installed for CAT control.
Radios with the 13 Pin DIN accessory connector and RS232 DB9 CAT port
TS-590, TS-990, TS-2000
Radios with the 6 Pin Mini DIN accessory connector and RS232 DB9 CAT port
TS-480
Radios with the 13 Pin DIN accessory connector and 6 Pin DIN CAT port (PTT wired to Pin 13 of the ACC port)
TS-440, TS-940
​
** TS-440 and TS-940 require the Kenwood original (now obsolete) IC-10/IF-10B chipsets to be installed for CAT control.
​
​
Xiegu Transceivers
Radios with the 8 Pin Mini DIN accessory connector and 3.5mm CAT port
G90, G106, X5105
​​​
Yeasu Transceivers
​
Radios with the 6 Pin Mini DIN accessory connector and 8 Pin Mini DIN CAT port
FT-100, FT-817, FT-818, FT-857 and FT-897
Radios with the 6 Pin Mini DIN accessory connector and RS232 DB9 CAT port
FT-450, FT-950, FT-991, FT-DX1200, FT-DX3000, FT-DX101D/MP
Radios with the 5 Pin DIN PKT connector and RS232 DB9 (Male) CAT port
FT-1000MP, FT-1000MP Mk5 Field, FT-2000, FT-DX5000,
FT-DX-9000 (all variants)
Radios with the 5 Pin DIN PKT connector and RS232 DB9 (Female) CAT port
FT-920
Radios with the 6 Pin Mini DIN accessory and 3.5mm AFSK connectors and RS232 DB9 CAT port
FT-847
** For the FT-847 we wire BOTH the 6 pin packer jack and the 3.5mm AFSK jack. So it can be used both on FM Packet and HF AFSK modes
Radios with the 6 Pin Mini DIN accessory and 3.5mm USB Type-B pass through for radio built-in CAT UART
FT-710 and FT-891
** The Yaesu FT-710 and FT-891 have a built in USB CAT port. This version of the interface does not have the built-in FTDI UART but instead passes a USB channel through to a USB Type B connector to plug directly into the CAT port on the FT-710/FT-891. This means you only need one USB connection to your PC to provide the interfaces external USB Sound card and utilise the radios built in CAT port.