top of page

USB Digimode Interface for Yaesu Transceivers allowing you to utilise software such as WSJT-X, FLDigi, DM780, Echolink, DM780, N1MM Logger, MixW and many more.


The Digimode-3 interface provides a single USB connection to your PC

and has abuilt-in USB Sound Card for digital mode operation. The Tx/Rx audio signals are galvanically isolated by Bourns 600:600 Ohm transformers and the built-in VOX PTT is opto-isolated.


With this interface, you will be up and running on FT8, PSK31, Echolink, SSTV, Pactor, Packet or any mode that requires Tx/Rx Audio Interfacing between your PC and Radio within minutes.


Cable length is 1.5m from the USB port on your PC to the interface box. The cables from the interface box to the transceiver is 0.6m. The box is very compact at 80x40x20mm making it ideal to hide away behind the PC or transceiver using no desk space.


The Digimode-3 instruction manual is here:


Yaesu Transceivers have combinations of Data connectors. Use the purchase options to select the inteface you need for your radio.

Option 1
FT-100, FT-817, FT-818,  FT-857, FT-897, FT-450, FT-950, FT-991, FT-DX1200, FT-DX3000, FT-DX101D/MP


Option 2
FT-920, FT-1000MP, FT-1000MP Mk5 Field, FT-2000, FT-DX5000,
FT-DX-9000 (all variants)


Option 3


Option 4
FT-847 ** see note.

** The FT-847 We wire BOTH the 6 pin packer jack and the 3.5mm AFSK jack. So it can be used both on FM Packet and HF AFSK modes

Digimode-3-Yaesu (Built in USB Sound Card and VOX PTT)

    bottom of page