USB Digimode Interface for your Icom Transceivers allowing you to fully utilise software such as WSJT-X, FLDigi, Ham Radio Deluxe, Echolink, PSK31, DM780, N1MM Logger, MixW and many more.
 
The Digimode-4 interface provides a single USB connection to your PC giving you full CAT control of your radio and a built-in USB Sound Card for digital mode operation. The Tx/Rx audio signals are galvanically isolated by Bourns 600:600 Ohm transformers and the hardware PTT is opto-isolated.
 
With this interface, you will be up and running on FT8, PSK31, Echolink, SSTV, Pactor, Packet or any mode that requires CAT control and Tx/Rx Audio Interfacing between your PC and Radio within minutes.
 
Cable length is 1.5m from the USB port on your PC to the interface box. The cables from the interface box to the transceiver is 0.6m. The box is very compact at 80x40x20mm making it ideal to hide away behind the PC or transceiver using no desk space.
 
The Digimode-4 instruction manual is here:
http://www.xggcomms.com/userimages/USB-Digimode-4.pdf
 
Icom Transceivers have two different accessory connectors. Use the purchase options to select the inteface you need for your radio.

Radios with the 8 Pin DIN accessory connector
IC-275, IC-375, IC-575, IC-707, IC-725, IC-726, IC-728, IC-729, IC-735, IC-736, IC-737, IC-738, IC-746 (All Versions), IC-756 (All Versions), IC-761, IC-765, IC-775, IC-775DSP, IC-781, IC-820, IC-821, IC-910, IC-7400, IC-7600, IC-7610, IC-7700, IC-7850.
 
Radios with the 13 Pin DIN accessory connector
IC-78, IC-703, IC-706 (All Versions), IC-718, IC-7000, IC-7100, IC-7200, IC-7300, IC-7410, IC-9100.