USB Digimode Interface for Kenwood Transceivers
Operate FT8, FT4, JS8Call, WSPR, PSK31, SSTV, Packet, Pactor, Echolink and other digital modes using popular software including WSJT-X, FLDigi, Ham Radio Deluxe, DM780, N1MM Logger and MixW.
Compatible with Popular Kenwood Radios
Compatible with a wide range of Icom transceivers including the TS-2000, TS-480SAT, TS-480HX, TS-590S, TS-590SG, TS-850S and TS-990S, along with many other Kenwood models.
Simply select your radio model from the purchase options to ensure you receive the correct interface.
Key Features
✅ Single USB connection to your PC
✅ Full CAT control of your transceiver
✅ Built-in USB Sound Card
✅ Galvanically isolated audio using Bourns 600:600 Ohm transformers
✅ Opto-isolated hardware PTT
✅ Protection against ground loops and RF feedback
✅ Works with Windows, Linux and MacOS
Be On The Air In Minutes
Whether you are operating FT8, FT4, JS8Call, WSPR, RTTY, PSK31, SSTV, Packet, Pactor or Echolink, the Digimode-4 provides reliable CAT control and high-quality transmit and receive audio interfacing between your PC and radio.
Compact and Easy to Install
✅ USB cable length: 1.5 metres
✅ Radio cable length: 0.6 metres
✅ Compact enclosure: 80 x 40 x 20 mm
The compact design makes the Digimode-4 easy to hide behind your transceiver or PC while taking up virtually no desk space.
The Digimode-4 instruction manual is here:
http://www.xggcomms.com/userimages/USB-Digimode-4.pdf
Kenwood Transceivers have combinations of CAT and Data connectors. Use the purchase options to select the inteface you need for your radio.
Option 1TS-450s, TS-690s, TS-790s, TS-850s, TS-950s.
* Also suitable for the following Kenwood transceivers where optional chips are installed.TS-140s and TS-680s (Require the IF-10C)
Option 2
TS-590, TS-890, TS-990, TS-2000
Option 3
TS-480 (uses 6 Pin mini-din acc connector)
Option 4
*TS-440, *TS-711, *TS-811, **TS-940
*TS-440 (requires the original Kenwood IC-10 chipset option fitted for CAT control)
**TS-940 (requires the original Kenwood IF-10B chipset option fitted for CAT control)
){kind=link}